Support of Omada Pro Devices on Omada Controller V6.2

Starting from Omada Controller V6.2, the Omada Pro devices can be adopted by Omada Controller, also supporting adopting both Omada and Omada Pro devices in the same site.

How to find IP address of my Omada Devices

By default, Omada devices use dynamic IP addresses. Whether connected to the internet or not, devices such as EAPs or switches should automatically obtain an IP address as long as they are connected to a local network or a DHCP server. There are different ways to find the IP address of an Omada device. Whether the device is in standalone mode or controller mode, you can also use the Omada APP or Discover Utility to find it.

How to configure Link Aggregation for EAP

Learn how to configure Link Aggregation on EAP with this step-by-step guide. Enhance your network performance and redundancy effectively.

AP9778_V1_Datasheet

How to configure MLO SSID of AP on Omada Controller

Multi-Link Operation (MLO) is the one of the most important features in the Wi-Fi 7 protocol. This article introduces how to configure MLO SSID of AP on Omada Controller.

Getting started with 6GHz

WiFi6E and WiFi7 introduce 6GHz band to cope with the network congestion caused by the increase of wireless devices, which provides more channel options and spectrum resources to support higher data transfer rate and lower network latency. This article will briefly introduce how to configure the 6GHz SSID for Omada APs, and list some tip instructions of key features to be used when applying 6GHz WiFi and suggestions to deal with common client connectivity issues.

What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller?

Introduction for Omada App Tool Kits

How to downgrade firmware of EAP if it is abnormal after the update

Overview of Omada EAP Power Supply