ER706WP-4G(EU&US)_V1.20_Datasheet

How to Configure DMZ on Omada Gateways

Learn how to configure DMZ on Omada Gateways in Standalone and Controller Mode to forward inbound WAN traffic to a designated internal host.

How to Configure Quality of Service (QoS) on an Omada Gateway in Standalone Mode

Configure Omada Gateway QoS in Standalone Mode to classify traffic, allocate WAN bandwidth, prioritize VoIP, and apply outbound DSCP markings.

How to Set Up an SSL VPN Server on Omada Gateway in Controller Mode

Learn how to set up an SSL VPN server on an Omada Gateway in Controller Mode, configure user authentication and client access permissions, and securely enable remote access to your private network.

How to Choose a SIM Card Plan and Configure LTE WAN on Your Omada Gateway

Using a SIM card as the WAN connection on an Omada gateway provides a flexible and reliable networking solution, especially in scenarios where traditional wired connections are unavailable or unstable. It is widely used in applications such as remote sites, temporary deployments, backup WAN failover, and mobile or outdoor environments.

How to Configure Dynamic DNS (DDNS) on Omada and Fusion Gateways Using the Omada App

Need to configure DDNS on an Omada or Fusion Gateway? Follow these steps to maintain a consistent hostname when your public IP address changes.

How to Allow Specific Public IPs to Access an Internal Server on Omada Gateways

When hosting an internal server behind an Omada Gateway, such as a web server, exposing it to the Internet can pose security risks. This guide demonstrates how to allow only specific public IP addresses to access an internal server, while blocking all other public traffic.

How to Utilize Link Backup and Policy Routing to Keep Critical Devices Online and Conserve Data

In dual-WAN environments where one WAN connection is designated as a backup link, it is often necessary to control which devices and networks are permitted to use the backup connection during a failover event. This guide demonstrates how to use Policy Routing to allow only specific devices, networks, or IP addresses to route traffic through the backup WAN.

How to Configure Port Mirroring on Omada Gateways

This article describes how to configure port mirroring for Gateways on Omada Controller and Standalone Mode. Port Mirroring is a feature that copies network traffic from one or more ports and sends it to another port for monitoring or analysis. This is commonly used for troubleshooting network issues, monitoring traffic, or performing traffic analysis using packet capture tools.

How to Use an Omada Controller to Manage Omada Devices Across Different Subnets Over the Internet

In enterprise networks, devices are often deployed across different subnets, making it common for Omada devices and the Omada Controller to reside in separate network segments. Supporting device adoption and management across subnets enables centralized control without changing existing network designs. This article introduces different methods for adopting devices across subnets using Omada products.