Documents

Introduction to Optical Link Budget Between OLT and ONU

The Optical Link Budget is a critical parameter for evaluating whether an optical signal in a fiber communication system can be successfully received along its transmission path. It covers all optical component losses and the transmit/receive capabilities between the OLT (Optical Line Terminal) and ONU (Optical Network Unit), ensuring stable operation within the design range.

How to configure SSL Certificates for Omada Controller

This guide provides instructions for configuring SSL/TLS certificates on Omada SDN Controller.

OC220(UN)_V2_Datasheet

TL-SG3210(UN)_V3_Datasheet

ES228GP(UN)_V1.6_Datasheet

ES228GP(UN)_V1_Datasheet

SM9220-1M(UN)_V1.20_Datasheet

SG6428XHP(UN)_V1.20_Datasheet

SX3016F(UN)_V1.30_Datasheet

ES210GMP(UN)_V1.6_Datasheet

ES210GMP(UN)_V1.20_Datasheet

SG3452X(UN)_V1.30_Datasheet

ES206GP(UN)_V1.20_Datasheet

ES206GP(UN)_V1_Datasheet

Ceiling Mount AP (English)

Recommended Methods for Omada Design Hub Compatibility Issues with Browsers

The Omada Design Hub is a browser-based application that provides floor plan editing and simulation functions. Different browsers have varying levels of support for SVG rendering, which may cause functionality or performance issues. If any issues arise, it is recommended to try switching to another browser first, preferably Google Chrome. This article also introduces solutions to other specific known issues with different browsers, including Firefox, Chrome, and Edge.

How to Configure Boundaries and Toggle Simulation Modes in Omada Design Hub

This guide provides instructions for configuring boundaries and toggling bounded/ boundless simulation modes in Omada Design Hub.

APM-200(UN)_V1.20_Installation Guide

How to configure Switch QoS in Controller Mode

Omada switch QoS enables prioritized traffic handling via DSCP mapping and SP/WRR scheduling, ensuring optimal performance for critical services like voice and video.

How to configure Multicast/Broadcast Rate Limit

Introduces how to configure Multicast/Broadcast Rate Limit.