How to access TP-Link JetStream Managed Switch via the Console port

How to build an 802.1X access authentication system using Switches on Omada Controller

The 802.1X protocol defines a port-based network access control mechanism, commonly used in enterprise network environments, through which devices must authenticate before connecting to the network, which helps to improve network security, whereas unauthorized access.

Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported)

This article introduces how to configure multi-VLAN and multi-SSID for Omada EAPs and Switches to work with a non-Omada gateway.

How to configure switch as DHCP server on Standalone mode

This article introduces how to set up switch as a DHCP server to assign IP addresses to clients and how to configure static routing if those clients want to access the internet through the router.

Best practice to prevent network loops with Omada SDN solution

This paper describes the recommended configuration on Omada SDN solution to prevent network loops and broadcast storms.

How to configure IGMP Snooping on Omada switches for hotel IPTV scenario

This article introduced the recommended configuration of IGMP Snooping for hotel IPTV based on a typical topology, including configuration under standalone mode and controller mode.

What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch

This article describes in detail the troubleshooting ideas for two devices under the same VLAN that cannot communicate normally when using Omada Switches.

Omada Switch DHCP Relay Configuration Guide

This article introduces the use of three common DHCP Relay scenarios and configuration guidance, covering Standalone and Controller two modes, to provide solutions for cross-segment allocation of IP addresses etc.

What to do if Omada Device Adoption Failure

This article gives suggestions on how to troubleshoot when your Omada devices adoption process failed responding to 4 different scenarios.

Troubleshooting for RADIUS Authentication Failure

RADIUS can be used to centrally manage and authenticate users' access requests to network resources.