How to Configure PIMv6 and MLD on Omada Campus Switches

Omada Campus switches support IPv6 PIM-DM and PIM-SM. Where IPv6 PIM-DM suits the network with smaller size and concentrated group members. IPv6 PIM-SM suits the network with larger size and dispersed group members.

How to configure MP-BGP on Omada Campus Switches

Currently, MP‑BGP on Omada Campus Switches supports the IPv6 unicast address family. This article demonstrates the configuration of MP-BGP on Omada Campus switches in standalone mode.

How to Use an Omada Controller to Manage Omada Devices Across Different Subnets Over the Internet

In enterprise networks, devices are often deployed across different subnets, making it common for Omada devices and the Omada Controller to reside in separate network segments. Supporting device adoption and management across subnets enables centralized control without changing existing network designs. This article introduces different methods for adopting devices across subnets using Omada products.

How to configure L2VPN VPWS/VPLS on Omada Campus Switches

This FAQ introduces the VPWS/VPLS feature and explains how to configure it using the switch CLI.

How to Configure Spanning Tree on Omada Controller

Spanning Tree Protocol (STP) is a Layer 2 Protocol that prevents loops in the network

How to implement an external DHCP server with DHCP Relay in the Omada Ecosystem with Omada Switches

In some network environments within the Omada Ecosystem, a third-party (external) DHCP server may be required instead of using the gateway’s built-in DHCP service. This guide explains how to configure Omada Switches to ensure that client devices can correctly reach and obtain IP addresses from the designated DHCP server after connecting to the network via DHCP Relay.

How to Use the Recovery Mode to Recover the Firmware for Omada Campus Switches

During a firmware upgrade, there are three essential parts: uboot, kernel and usrlmg, the phenomenon are different if the different parts are damaged. In this article, we will briefly introduce the possible errors user may encounter during boot up and the procedure of recovering damaged firmware if unable to boot normally on Omada Campus switches, please check each section follow the corresponding guide to recover according to the error you are seeing on the device.

Omada Campus Stackable L3 Managed Switch_Installation Guide 2

Omada Pro L3 Switch BGP Configuration Guide

What is M-LAG and How to Configure M-LAG on Omada Switch from Omada Pro Network System