Documents

How to Use the Recovery Mode to Recover the Firmware for Omada Campus Switches

During a firmware upgrade, there are three essential parts: uboot, kernel and usrlmg, the phenomenon are different if the different parts are damaged. In this article, we will briefly introduce the possible errors user may encounter during boot up and the procedure of recovering damaged firmware if unable to boot normally on Omada Campus switches, please check each section follow the corresponding guide to recover according to the error you are seeing on the device.

How to Use the Speed Test Feature on the Omada Controller v6.2 and above

Starting from v6.2, Omada Network System introduces the Speed Test feature, offering both manual and scheduled modes to help us monitor network quality easily.

EAP650GP-Desktop(EU)_V1_1.0.2 Build 20251103

How to config LLDP on Omada Gateway via Omada Controller

LLDP (Link Layer Discovery Protocol) is a standardized Layer 2 protocol that enables network devices to automatically discover and share information about their directly connected neighbors. By exchanging details such as device identity, port information, system capabilities, and management addresses, LLDP helps network administrators map network topologies, troubleshoot connectivity issues, and facilitate automated configurations.

EAP787(EU)_V1_1.1.5 Build 20251222

TL-SG2428P(UN)_V4_4.0.26 Build 20260121

IES210GPP(UN)_V1_1.0.2 Build 20260205

SG2210P(UN)_V5.20_5.20.18 Build 20260121

How to Choose Ethernet Cables for More Stable PoE Power Supply

ER7212PC(UN)_V1_1.4.1 Build 20260205

S7500-26XF6Y(UN)_V1.20_Datasheet

S7500-24Y4C(UN)_V1.20_Datasheet

EAP775-Wall(EU)_V1_1.0.4 Build 20260214

ER7212PC(UN)_V2.20_Datasheet

EAP211-Bridge KIT_V3_Datasheet

EAP211-Bridge KIT_V2_Datasheet

TL-SG105-M2(UN)_V3_Datasheet

TL-SG108-M2(UN)_V3_Datasheet

ER7406(UN)_V1.20_Datasheet

ER605W(EU)_V2_Datasheet