How to Configure Portal Authentication on Omada Controller using Omada App

This guide provides instructions for configuring portal authentication on Omada Controller using Omada App.

How to assign a static IP address to the EAP using Omada APP

Learn how to configure a static IP address for your EAP (Omada Access Point) using the Omada APP.

How to separate a large amount of VLAN via Bridge VLAN and SSID VLAN (with VLAN Pool)

Bridge VLAN is a feature that allows multiple VLANs to share a single Layer 3 interface and DHCP pool to reduce gateway resource usage. SSID VLAN binds a specific SSID to one or multiple VLANs for straightforward traffic isolation. By combining Bridge VLAN and SSID VLAN, you can meet the requirements of the apartment or hotel room network design without creating a large number of Layer 3 interfaces.

How to find IP address of my Omada Devices

By default, Omada devices use dynamic IP addresses. Whether connected to the internet or not, devices such as EAPs or switches should automatically obtain an IP address as long as they are connected to a local network or a DHCP server. There are different ways to find the IP address of an Omada device. Whether the device is in standalone mode or controller mode, you can also use the Omada APP or Discover Utility to find it.

How to create a VLAN using Omada App

Creating a VLAN using Omada App just needs a few steps, in this article, you will learn how to set it up.

How to detect Rogue Access Points on Omada Controller

How to configure Fast Roaming on Omada Controller

This article describes how to configure the Fast Roaming function on the Omada Controller to optimize client roaming performance of Omada APs.

How to configure SSID VLAN on Omada AP with Third-Party Gateway

This article introduces how to configure SSID VLAN on the Omada APs to realize VLAN isolation.

Should I keep the Omada Controller running after configuration?

This article explains whether you need to keep an Omada Controller running to use different functions of APs. Objective

What can I do If Omada App can’t find my AP

This article will introduce what you can do when Omada App can’t find your standalone AP, such as turn off VPN on mobile phone, enable local network, reboot and reset AP, etc.