Omada OUI-Based VLAN Configuration Guide

OUI-Based VLAN allows Omada switches to automatically recognize IP Phones based on the OUI portion of their MAC address and place them into the appropriate Voice VLAN. This is especially useful in environments where IP Phones do not support automatic voice VLAN advertisement methods such as LLDP-MED.

How to Use an Omada Controller to Manage Omada Devices Across Different Subnets Over the Internet

In enterprise networks, devices are often deployed across different subnets, making it common for Omada devices and the Omada Controller to reside in separate network segments. Supporting device adoption and management across subnets enables centralized control without changing existing network designs. This article introduces different methods for adopting devices across subnets using Omada products.

How to Configure Spanning Tree on Omada Controller

Spanning Tree Protocol (STP) is a Layer 2 Protocol that prevents loops in the network

How to Register a TP-Link Product Using Your TP-Link ID

Learn how to complete TP-Link product registration at myproducts.tp-link.com. Manage your devices, access support, and track warranty information with your TP-Link ID.

How to implement an external DHCP server with DHCP Relay in the Omada Ecosystem with Omada Switches

In some network environments within the Omada Ecosystem, a third-party (external) DHCP server may be required instead of using the gateway’s built-in DHCP service. This guide explains how to configure Omada Switches to ensure that client devices can correctly reach and obtain IP addresses from the designated DHCP server after connecting to the network via DHCP Relay.

How to Use the Recovery Mode to Recover the Firmware for Omada Campus Switches

During a firmware upgrade, there are three essential parts: uboot, kernel and usrlmg, the phenomenon are different if the different parts are damaged. In this article, we will briefly introduce the possible errors user may encounter during boot up and the procedure of recovering damaged firmware if unable to boot normally on Omada Campus switches, please check each section follow the corresponding guide to recover according to the error you are seeing on the device.

What is Management Port on Omada Campus Switch and How to Use It

The configuration of management port could only be conducted through CLI, you could either access via SSH/Telnet or the console port. By default, the management interface will obtain IP address through DHCP, which means if you do not connect the management port to a valid DHCP server, it won’t get a valid IP address for you to access. You could also configure a static IP address for the management interface.

What is VRF and How to Configure VRF on Omada Campus Switches When Adopted by Omada Controller

How to configure Switch QoS in Controller Mode

Omada switch QoS enables prioritized traffic handling via DSCP mapping and SP/WRR scheduling, ensuring optimal performance for critical services like voice and video.

How to Maintain Management VLAN and Port Settings When Adopting Switches on Omada Network V6

Before Omada Controller V6, when adopting a switch on controller, the default configuration will be applied to the switch and override all the previous pre-configuration done in standalone mode. This could cause inconvenience while adopting switches to a network which management VLAN is not the default VLAN. If the default configuration, especially the default VLAN interface, overrides the pre-configuration done on the switch, it will be disconnected after adoption and hard to recover.