Release Note for ER605(UN) v2.0/v2.20/v2.26/v2.30/v2.36/v2.6 and ER605(IN) v2.28/v2.38/v2.8 and ER605(BR) v2.36
Version Info: 
New Features: 
1. Add support for V6plus/DS-Lite Dial-up.
2. Add support for configuring multiple segments for the IP pool when acting as a DHCP server.
3. Add support for showing a list of clients obtaining IP addresses via DHCP when adopted on the controller.
4. Add support for multi-channel configuration, currently supports entering standalone UI to configure while disconnected from the controller.
5. Add support for configuring ports of SIP ALG.
Enhancements: 
1. Optimized boot-up time.
2. Optimized system stability.
3. Optimized menu layout.
4. Optimized the efficiency of Network configuration deployment.
5. Optimized the resource consumption of traffic statistics.
......
Bug Fixed: 
1. Fixed the problem that DHCP Option 2 does not allow negative values to be entered.
2. Fixed the problem that the gateway does not report the serial number (S/N) information to the controller.
3. Fixed the problem that ACL rules do not take effect for VPN users.
4. Fixed the problem that when the DHCP address pool still has available addresses, no log is generated when the DHCP server reaches the device specification limit.
5. Fixed the problem that when an invalid LAN name is configured on the controller, the rules are lost during a full configuration push, and the associated LAN DNS configuration becomes ineffective.
......
Additional Information: 
No.