Omada Pro 24-Port PoE+ Gigabit L2+ Managed Switch with 4 SFP+ Slots

How to find IP address of my Omada Devices

By default, Omada devices use dynamic IP addresses. Whether connected to the internet or not, devices such as EAPs or switches should automatically obtain an IP address as long as they are connected to a local network or a DHCP server. There are different ways to find the IP address of an Omada device. Whether the device is in standalone mode or controller mode, you can also use the Omada APP or Discover Utility to find it.

How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI

This article introduces how to configure management VLAN on TP-Link smart and managed switches.

How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI

How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI

Troubleshooting Guide: Failing to detect OAM link fault

Ethernet Operations, Administration, and Maintenance (OAM) is a Layer 2 protocol defined in the IEEE 802.3ah standard used to monitor and troubleshoot Ethernet network problems. With Ethernet OAM, network administrators can manage the network effectively. Currently, Omada L2+/L3 switches support Ethernet Flow Monitoring OAM (EFM OAM).

What should I do if my switch has no Internet access?

This article will list a few simple steps about how to do a check on the switch when the switch has no Internet access and try to solve the problem.

What should I do if my Internet from switch is unstable?

This article will list a few simple steps about how to do a check on the switch when the Internet is unstable and try to solve the problem.

How to configure LAG (LACP) on Omada Switches via Omada Controller

LAG can aggregate multiple physical ports into a logical interface, increasing link bandwidth and providing backup ports to enhance connection reliability.

How to configure switch as DHCP server on Standalone mode

This article introduces how to set up switch as a DHCP server to assign IP addresses to clients and how to configure static routing if those clients want to access the internet through the router.

Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported)

This article introduces how to configure multi-VLAN and multi-SSID for Omada EAPs and Switches to work with a non-Omada gateway.