Documents

How to Set Alarm on industrial switches

How to Configure Load Balancing for Wireless Client in Omada Controller

Uneven wireless client distribution can lead to poor user experience and inefficient use of network resources. In some cases, certain APs may become overloaded while others remain idle. To address this issue, the Omada Controller v6.2 provides load balancing, along with dynamic optimization and service-aware mechanisms. These features help distribute clients more evenly across APs, improve user experience consistency, maximize network capacity, and reduce operation and maintenance costs.

How to Configure Upgrade, Reboot and WLAN Schedules for Omada EAPs

Learn how to configure Upgrade, Reboot and Wi-Fi Schedules for Omada EAPs in both Controller and Standalone modes. Automate system upgrade or restart and define Wi-Fi uptime to enhance network security and minimize power consumption. This article will show you how to set up automated upgrades, reboot cycles and Wi-Fi Radio "On/Off" schedules for your Omada EAPs.

How to configure SNMP on Omada Controller

Simple Network Management Protocol (SNMP) is a widely used network management protocol that runs on Transmission Control Protocol and Internet Protocol networks. You use SNMP to manage network devices from a central location and clearly see how each device operates. In addition, SNMP helps you detect problems early and respond quickly, which helps you keep the network stable and reliable. The following section describes how to configure SNMP functions in controller mode.

SG2005P-PD(UN)_V2.6_Datasheet

SG2005P-PD(UN)_V2_Datasheet

POE170S(UN)_V3.6_Datasheet

SM5220-1M(UN)_V2_Datasheet

SM5220-3M(UN)_V2_Datasheet

EAP225_V4.26_Datasheet

EAP225_V4.20_Datasheet

EAP615GP-Wall_V1.20_Datasheet

EAP625GP-Wall_V1.20_Datasheet

OC200(UN)_V3.6_Datasheet

OC200(UN)_V3_Datasheet

SG3210XHP-M2(UN) _V3.20_Datasheet

SG3210XHP-M2(UN) _V3.26_Datasheet

Omada Software Controller_V6.1_Datasheet

Omada Cloud-Based Controller_V6.1_Datasheet

OJB-100((UN)_V1.26_Datasheet