Documents

How to configure Gateway ACL on Fusion Gateway

ACL (Access Control List) allows a network administrator to create rules to restrict access to network resources. ACL rules filter traffic based on specified criteria such as IP Subnet, Network, Device, specific Application and special Port, and determine whether to forward the matched packets. These rules can be applied to specific clients or groups whose traffic passes through the gateway.

How to Configure SD-WAN on Fusion Gateway

Software-Defined Wide Area Network (SD-WAN) revolutionizes traditional WAN architectures by leveraging centralized control and automation to dynamically route traffic across multiple connections (e.g., MPLS, broadband, LTE). The key benefit of SD-WAN is centralized Policy Management, allowing users to define and manage network policy across different Fusion Gateway systems.

Getting started with an Omada Fusion Gateway

This article will guide you through getting started with your Omada Fusion Gateway.

How to Use Gateway QoS Function with an Omada Fusion Gateway

Gateway QoS (Quality of Service) refers to a set of mechanisms implemented on a network gateway (such as a router or firewall) to manage, prioritize, and control traffic flows across the network. Its primary objective is to ensure predictable performance for critical applications while optimizing overall bandwidth utilization.

How to Configure Gateway Rules for Content Filtering on Fusion Gateway

Omada Fusion Gateway content filtering supports multiple filtering methods, including category-based filtering, domain allow/block lists, and Ad blocker. The built-in Ad Blocker uses DNS-level domain filtering to block advertising and tracking domains, helping reduce intrusive ads and enhance the overall browsing experience. Filtering rules can be applied to specific networks, IP groups, or individual client devices.

How to set up Omada Fusion Gateway using Omada App

Getting Started with LightLink VPN

LightLink VPN is designed for zero-configuration remote access, allowing users to securely access your network from anywhere. LightLink VPN uses an invite-based setup. The administrator generates an invite (link or email), and the invited user opens it in the Navi App and taps “Connect” to start the VPN. This article will introduce how to use this function.

How to Utilize Link Backup and Policy Routing to Keep Critical Devices Online and Conserve Data

In dual-WAN environments where one WAN connection is designated as a backup link, it is often necessary to control which devices and networks are permitted to use the backup connection during a failover event. This guide demonstrates how to use Policy Routing to allow only specific devices, networks, or IP addresses to route traffic through the backup WAN.

WLAN Optimization (AI-RRM) White Paper

How to Configure PIMv6 and MLD on Omada Campus Switches

Omada Campus switches support IPv6 PIM-DM and PIM-SM. Where IPv6 PIM-DM suits the network with smaller size and concentrated group members. IPv6 PIM-SM suits the network with larger size and dispersed group members.

How to configure MP-BGP on Omada Campus Switches

Currently, MP‑BGP on Omada Campus Switches supports the IPv6 unicast address family. This article demonstrates the configuration of MP-BGP on Omada Campus switches in standalone mode.

How to configure Port Mirror on Omada Gateways?

This article describes how to configure port mirroring for Gateways on Omada Controller and Standalone Mode. Port Mirroring is a feature that copies network traffic from one or more ports and sends it to another port for monitoring or analysis. This is commonly used for troubleshooting network issues, monitoring traffic, or performing traffic analysis using packet capture tools.

How to Use an Omada Controller to Manage Omada Devices Across Different Subnets Over the Internet

In enterprise networks, devices are often deployed across different subnets, making it common for Omada devices and the Omada Controller to reside in separate network segments. Supporting device adoption and management across subnets enables centralized control without changing existing network designs. This article introduces different methods for adopting devices across subnets using Omada products.

How to configure L2VPN VPWS/VPLS on Omada Campus Switches

This FAQ introduces the VPWS/VPLS feature and explains how to configure it using the switch CLI.

How to Configure Spanning Tree on Omada Controller

Spanning Tree Protocol (STP) is a Layer 2 Protocol that prevents loops in the network

How to enable PWA to improve page loading performance

In weak or unstable network conditions, pages may load slowly or experience noticeable delays during access.Omada Controller supports PWA capabilities to improve performance and stability:

How to configure IPsec VPN on Omada Gateway in Controller Mode (Controller v6.2 and above)

IPsec Site-to-Site VPN enables the connection of geographically separated networks. Large enterprises commonly use it to establish secure VPN connections between branch offices and headquarters. The IPsec VPN connects branch routers over the public network, ensuring secure transmission of private network data.

How to configure IPsec VPN on Omada Gateway in Standalone Mode

With the Site-to-Site VPN function, different private networks can be connected over the internet.

How to implement an external DHCP server with DHCP Relay in the Omada Ecosystem with Omada Switches

In some network environments within the Omada Ecosystem, a third-party (external) DHCP server may be required instead of using the gateway’s built-in DHCP service. This guide explains how to configure Omada Switches to ensure that client devices can correctly reach and obtain IP addresses from the designated DHCP server after connecting to the network via DHCP Relay.

Bluetooth IoT Technology White Paper