Router VPN SafeStream Gigabit Multi-WAN

How to separate a large amount of VLAN via Bridge VLAN and SSID VLAN (with VLAN Pool)

Bridge VLAN is a feature that allows multiple VLANs to share a single Layer 3 interface and DHCP pool to reduce gateway resource usage. SSID VLAN binds a specific SSID to one or multiple VLANs for straightforward traffic isolation. By combining Bridge VLAN and SSID VLAN, you can meet the requirements of the apartment or hotel room network design without creating a large number of Layer 3 interfaces.

How to find IP address of my Omada Devices

By default, Omada devices use dynamic IP addresses. Whether connected to the internet or not, devices such as EAPs or switches should automatically obtain an IP address as long as they are connected to a local network or a DHCP server. There are different ways to find the IP address of an Omada device. Whether the device is in standalone mode or controller mode, you can also use the Omada APP or Discover Utility to find it.

How to Set Up PPTP & L2TP VPN Server with Omada Gateway Using Omada APP

PPTP is the simplest and most basic type of VPN. L2TP is a more secure VPN protocol built on top of PPTP. Omada Gateway supports acting as a server for both VPN types and offers multiple configuration methods. This document introduces how to configure PPTP and L2TP VPN servers via the Omada App in Controller Mode.

How to set up Site-to-Site Auto IPsec VPN Tunnels on Omada Gateway via Omada Controller using Omada APP

How to create a VLAN using Omada App

Creating a VLAN using Omada App just needs a few steps, in this article, you will learn how to set it up.

The differences and similarities between Load Balancing and Link Backup

WAN load balancing and WAN link backup can distribute network data traffic and switch data links according to the online/offline status of WAN ports in multi-WAN scenarios, providing a solid foundation for building efficient and reliable network systems.

How to configure DPI on Omada Gateway via Omada Controller

This article introduces how to configure DPI on the Omada Gateway via the Omada Controller.

How to configure IPv6 Access Control on Omada Gateway

This article describes how to configure IPv6 access control to block access to the internal network, allow access to the internal network from internet and block access to the internet.

What should I do when speed test results do not meet expectations?

Speed testing has always been one of the key concerns for users, and incorrect device or test configuration may lead to unexpected speed test results.

Client is unable to access the Internet for business router

This article introduces 10 solutions when your devices are unable to access to the internet such as dns issue , vlan settings.