Documents

How to configure Gateway ACL on Fusion Gateway

ACL (Access Control List) allows a network administrator to create rules to restrict access to network resources. ACL rules filter traffic based on specified criteria such as IP Subnet, Network, Device, specific Application and special Port, and determine whether to forward the matched packets. These rules can be applied to specific clients or groups whose traffic passes through the gateway.

How to Configure SD-WAN on Fusion Gateway

Software-Defined Wide Area Network (SD-WAN) revolutionizes traditional WAN architectures by leveraging centralized control and automation to dynamically route traffic across multiple connections (e.g., MPLS, broadband, LTE). The key benefit of SD-WAN is centralized Policy Management, allowing users to define and manage network policy across different Fusion Gateway systems.

Getting started with an Omada Fusion Gateway

This article will guide you through getting started with your Omada Fusion Gateway.

How to Use Gateway QoS Function with an Omada Fusion Gateway

Gateway QoS (Quality of Service) refers to a set of mechanisms implemented on a network gateway (such as a router or firewall) to manage, prioritize, and control traffic flows across the network. Its primary objective is to ensure predictable performance for critical applications while optimizing overall bandwidth utilization.

Troubleshooting Guide for Common Issues with Fusion Gateway

This article provides a basic troubleshooting guide for common issues encountered when using an Omada Fusion Gateway. If you encounter any related issues, you can refer to this article first to troubleshoot them.

How to Configure Gateway Rules for Content Filtering on Fusion Gateway

Omada Fusion Gateway content filtering supports multiple filtering methods, including category-based filtering, domain allow/block lists, and Ad blocker. The built-in Ad Blocker uses DNS-level domain filtering to block advertising and tracking domains, helping reduce intrusive ads and enhance the overall browsing experience. Filtering rules can be applied to specific networks, IP groups, or individual client devices.

How to set up Omada Fusion Gateway using Omada App

Getting Started with LightLink VPN

LightLink VPN is designed for zero-configuration remote access, allowing users to securely access your network from anywhere. LightLink VPN uses an invite-based setup. The administrator generates an invite (link or email), and the invited user opens it in the Navi App and taps “Connect” to start the VPN. This article will introduce how to use this function.

EAP650 D120-Outdoor_V1.20_Datasheet

EAP650 D120-Outdoor(US)_V1.26_Datasheet

EAP650 D30-Outdoor_V1.20_Datasheet

EAP650 D30-Outdoor(US)_V1.26_Datasheet

EAP725-Wall(US)_V2.6_Datasheet

EAP725-Wall_V2_Datasheet

Navi_v1.0.21_Windows_x64

SG2452LP(UN)_V1.6_1.0.22 Build 20260610

SG2452LP(UN)_V1_1.0.22 Build 20260610

EAP725-Outdoor(CA)_V1_1.0.8 Build 20260515

SG2008P(UN)_V3.36_3.30.6 Build 20260509

SG2008P(UN)_V3.30_3.30.6 Build 20260509