Documents

How to configure Gateway ACL on Fusion Gateway

ACL (Access Control List) allows a network administrator to create rules to restrict access to network resources. ACL rules filter traffic based on specified criteria such as IP Subnet, Network, Device, specific Application and special Port, and determine whether to forward the matched packets. These rules can be applied to specific clients or groups whose traffic passes through the gateway.

How to Configure SD-WAN on Fusion Gateway

Software-Defined Wide Area Network (SD-WAN) revolutionizes traditional WAN architectures by leveraging centralized control and automation to dynamically route traffic across multiple connections (e.g., MPLS, broadband, LTE). The key benefit of SD-WAN is centralized Policy Management, allowing users to define and manage network policy across different Fusion Gateway systems.

Getting started with an Omada Fusion Gateway

This article will guide you through getting started with your Omada Fusion Gateway.

How to Use Gateway QoS Function with an Omada Fusion Gateway

Gateway QoS (Quality of Service) refers to a set of mechanisms implemented on a network gateway (such as a router or firewall) to manage, prioritize, and control traffic flows across the network. Its primary objective is to ensure predictable performance for critical applications while optimizing overall bandwidth utilization.

Troubleshooting Guide for Common Issues with Fusion Gateway

This article provides a basic troubleshooting guide for common issues encountered when using an Omada Fusion Gateway. If you encounter any related issues, you can refer to this article first to troubleshoot them.

How to Configure Gateway Rules for Content Filtering on Fusion Gateway

Omada Fusion Gateway content filtering supports multiple filtering methods, including category-based filtering, domain allow/block lists, and Ad blocker. The built-in Ad Blocker uses DNS-level domain filtering to block advertising and tracking domains, helping reduce intrusive ads and enhance the overall browsing experience. Filtering rules can be applied to specific networks, IP groups, or individual client devices.

How to set up Omada Fusion Gateway using Omada App

Getting Started with LightLink VPN

LightLink VPN is designed for zero-configuration remote access, allowing users to securely access your network from anywhere. LightLink VPN uses an invite-based setup. The administrator generates an invite (link or email), and the invited user opens it in the Navi App and taps “Connect” to start the VPN. This article will introduce how to use this function.

SG2428P(UN)_V5.40_Datasheet

Navi_v1.0.21_Windows_x64

How to Utilize Link Backup and Policy Routing to Keep Critical Devices Online and Conserve Data

In dual-WAN environments where one WAN connection is designated as a backup link, it is often necessary to control which devices and networks are permitted to use the backup connection during a failover event. This guide demonstrates how to use Policy Routing to allow only specific devices, networks, or IP addresses to route traffic through the backup WAN.

WLAN Optimization (AI-RRM) White Paper

S6500-24GP4XF(UN)_V1_Datasheet

S6500-48GP6XF(UN)_V1_Datasheet

S7500-32C(UN)_V1_Datasheet

EAP235-Wall_V1.20_Datasheet

SX3016F(UN)_V1.30_Datasheet

SG3452P_V3.40_datasheet

SG3452P(UN)_V3.40_Datasheet

SG2428P(UN)_V5.40_5.40.6 Build 20260509