Only Suitable for: EAP110/EAP120/EAP220 and T1600G-28TS/T1600G-28PS/T1500-28PCT/T1600G-52PS/T1600G-52TS/T1700G-28TQ
Topology:
In the following simplified topology, PoE switch is T1600G-28PS, it powers the EAP220 via port 4 and connected with an internet gateway router via port 24, the router act as the DHCP server for EAP220.
Requirement:
On the EAP and Switch, we want to set up VLAN200/SSID 200 and want this VLAN/SSID to have Internet access.
Configuration on T1600G-28PS:
Create VLAN200 on the switch and add port 4 and port 24 into VLAN200 (untagged port).
Configuration on EAP Controller:
On the bottom of EAP Controller, choose “Wireless Settings”. Add a new SSID or modify on the default existing SSID by “Edit SSID—Wireless VLAN ID”.
After the configuration, you can find SSID “EAP200”, which is in VLAN200.
Related Documents
How to set up rate limit through EAP controller
11-11-2019
343