Documents

Getting started with an Omada Fusion Gateway

This article will guide you through getting started with your Omada Fusion Gateway.

How to Use Gateway QoS Function with an Omada Fusion Gateway

Gateway QoS (Quality of Service) refers to a set of mechanisms implemented on a network gateway (such as a router or firewall) to manage, prioritize, and control traffic flows across the network. Its primary objective is to ensure predictable performance for critical applications while optimizing overall bandwidth utilization.

How to Configure Gateway Rules for Content Filtering on Fusion Gateway

Omada Fusion Gateway content filtering supports multiple filtering methods, including category-based filtering, domain allow/block lists, and Ad blocker. The built-in Ad Blocker uses DNS-level domain filtering to block advertising and tracking domains, helping reduce intrusive ads and enhance the overall browsing experience. Filtering rules can be applied to specific networks, IP groups, or individual client devices.

How to set up Omada Fusion Gateway using Omada App

How to Configure SD-WAN on Fusion Gateway

Software-Defined Wide Area Network (SD-WAN) revolutionizes traditional WAN architectures by leveraging centralized control and automation to dynamically route traffic across multiple connections (e.g., MPLS, broadband, LTE). The key benefit of SD-WAN is centralized Policy Management, allowing users to define and manage network policy across different Fusion Gateway systems.

How to configure Gateway ACL on Fusion Gateway

ACL (Access Control List) allows a network administrator to create rules to restrict access to network resources. ACL rules filter traffic based on specified criteria such as IP Subnet, Network, Device, specific Application and special Port, and determine whether to forward the matched packets. These rules can be applied to specific clients or groups whose traffic passes through the gateway.

ES210XPP-M2(UN)_V1_Datasheet

Omada Cloud-Based Controller_V6.2_Datasheet

What should I do if I cannot start the Omada Controller in windows system (Controller v6 or above)

This article explains that starting from version 6.0, the Omada Controller has the JRE embedded within the controller package. Therefore, users no longer need to worry about Java version compatibility or Java path configuration issues. If the controller fails to start on Windows, you can try alternative startup methods, such as launching via the provided batch file or using the command-line method to start the controller.

Fusion 2.5G(UN)_V1_Datasheet

OC200(UN)_V1_1.40.18 Build 20260506

OC200(UN)_V2_2.25.18 Build 20260506

OC200(UN)_V3_3.2.18 Build 20260506

OC220(UN)_V1.6_1.5.18 Build 20260506

OC220(UN)_V1_1.5.18 Build 20260506

OC400(UN)_V1.26_1.12.18 Build 20260506

OC400(UN)_V1.20_1.12.18 Build 20260506

OC400(UN)_V1_1.12.18 Build 20260506

OC300(UN)_V1.26_1.34.18 Build 20260506

OC300(UN)_V1.20_1.34.18 Build 20260506