Omada Pro 24-Port 2.5G Stackable L3 Managed Switch with 4 25G Slots

S6500-24M4Y(UN)_V1_Datasheet

IPTV Technical White Paper

4.1: Supports all L2+/L3 switches and EAPs. 4.2 Solution 1: Recommended with SX3 series switches or above. Supports all GPON APs and DS-P7001-01/04/08/16 OLTs. 4.2 Solution 2: Supports all L2+/L3 switches, GPON APs, and DS-P7001-01/04/08/16 OLTs. 4.3: Supports all L3 switches and EAPs.

How to Adopt an Omada Switch into an Omada Controller

Adopt an Omada Switch into a Hardware, Software, or Cloud-Based Controller using the web interface or Omada App for centralized network management.

Best Practices for Deploying Sonos on an Omada Network

Sonos device causing loops in the Omada Network? Follow this best practice guide to configure the Omada devices to work with your Sonos speakers.

How to Configure PIMv6 and MLD on Omada Campus Switches

Omada Campus switches support IPv6 PIM-DM and PIM-SM. Where IPv6 PIM-DM suits the network with smaller size and concentrated group members. IPv6 PIM-SM suits the network with larger size and dispersed group members.

How to Configure MP-BGP on Omada Campus Switches

Currently, MP‑BGP on Omada Campus Switches supports the IPv6 unicast address family. This article demonstrates the configuration of MP-BGP on Omada Campus switches in standalone mode.

How to Configure L2VPN VPWS/VPLS on Omada Campus Switches

This FAQ introduces the VPWS/VPLS feature and explains how to configure it using the switch CLI.

How to Configure Spanning Tree on Omada Controller

Spanning Tree Protocol (STP) is a Layer 2 Protocol that prevents loops in the network.

How to Implement an External DHCP Server with DHCP Relay in the Omada Ecosystem Using Omada Switches

In some network environments within the Omada Ecosystem, a third-party (external) DHCP server may be required instead of using the gateway’s built-in DHCP service. This guide explains how to configure Omada Switches to ensure that client devices can correctly reach and obtain IP addresses from the designated DHCP server after connecting to the network via DHCP Relay.

How to Use the Recovery Mode to Recover the Firmware for Omada Campus Switches

During a firmware upgrade, there are three essential parts: uboot, kernel and usrlmg, the phenomenon are different if the different parts are damaged. In this article, we will briefly introduce the possible errors user may encounter during boot up and the procedure of recovering damaged firmware if unable to boot normally on Omada Campus switches, please check each section follow the corresponding guide to recover according to the error you are seeing on the device.