How to Resolve HTTPS Certificate Warnings on Omada Controller

Resolve HTTPS certificate expiration warnings on Omada Controller by trusting the default certificate or uploading a trusted PEM, PFX, or JKS certificate.

How to Configure Root Node Feature on an Omada Controller

Configure the Root Node in Omada Controller to correct topology relationships on sites without an Omada gateway and identify device uplinks more accurately.

Omada Hardware Controller Management Capacity: Recommended and Maximum Device Limits

Understand recommended and maximum device capacities for Omada Controllers, capacity notifications, and performance considerations when managing large-scale deployments.

How to Prepare for the End of ECSP v1 Support in Omada Controller

Learn how to identify ECSP v1 devices, upgrade to ECSP v2-compatible firmware, and prepare Local or Cloud-Based Controllers for v6.4 and later.

How to Configure and Use the “Replace with Spare” Feature on Omada Controller v6.3 and Above

How to easily replace a device managed by Omada Controller? The Spare feature introduced in Omada Controller v6.3 provides a fast and reliable replacement mechanism. Follow this article to explore.

How to Configure Dynamic DNS (DDNS) on Omada and Fusion Gateways Using the Omada App

Need to configure DDNS on an Omada or Fusion Gateway? Follow these steps to maintain a consistent hostname when your public IP address changes.

WLAN Optimization (AI-RRM) White Paper

How to Use an Omada Controller to Manage Omada Devices Across Different Subnets Over the Internet

In enterprise networks, devices are often deployed across different subnets, making it common for Omada devices and the Omada Controller to reside in separate network segments. Supporting device adoption and management across subnets enables centralized control without changing existing network designs. This article introduces different methods for adopting devices across subnets using Omada products.

How to Configure Spanning Tree on Omada Controller

Spanning Tree Protocol (STP) is a Layer 2 Protocol that prevents loops in the network.

What Should I Do if the Omada Controller (v6 or Later) Fails to Adopt Devices?

This article will give you some troubleshooting suggestions based on different error codes.