Omada Outdoor Bullet Camera Installation Guide

Get Ready

Appearance

¹Refer to Install microSD Card (Optional) to insert a microSD card (not provided) for local storage.
²Remove the cover and use a pin to press and hold the Reset button for 5 seconds to reset camera.

Install microSD Card (Optional)

Set Up Camera

Step 1. Connect the hardware
Connect your camera to the network. 

Step 2. Power on the camera
Power on the camera with the PoE power supply or an external power adapter (not provided).

Step 3. Set up the camera

Download and launch the Omada Guard app or PC Client software, and follow the on-sceen instructions to finish initial setup.

• Omada Guard App

• Omada Guard PC Client

Download the software at: https://support.omadanetworks.com>download>software>Omada Guard PC Client/

* You can also connect the camera to an NVR and use the NVR to set up and manage the camera. For more detailed instructions, refer to the user guides at https://support.omadanetworks.com/.

More Management Methods

• Method 1: Via an Omada NVR

The camera works with an NVR for easier batch access and management. Here, we use an Omada NVR as an example. 

1. Make sure your NVR is working properly and connected to the internet.
2. Connect the camera to the PoE port of the NVR.
3. Follow the on-screen instructions to activate and add the camera.

• Method 2: Via a Web Browser

1. Find the camera's IP address on your router’s client page.
2. On your local computer, open a web browser and enter https:// followed by your camera's IP address (https://192.168.0.60 by default).
3. Follow the web instructions to activate your cameras.
Done. You can view the live video on the Preview page and go to the Settings page to change camera settings.

Mount Camera

Waterproof Cables (Optional)

Safety Information

• Make sure your power supply matches your camera. The power source should comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) of IEC 62368-1.
• Make sure that the wall is strong enough to withstand 4 times the weight of the camera and mounting bracket.
• If you are uncertain or uncomfortable performing the installation, consult a qualified electrician. It is recommended to install it in a place that children cannot touch.
• Do not use any other power adapters than those recommended.
• Do not use damaged power adapter to charge the device.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Adapter shall be installed near the equipment and shall be easily accessible.
• Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.