How to Configure Virtual WAN on Omada Gateway in Standalone Mode

Learn how to configure and verify Virtual WAN on an Omada Gateway in standalone mode using VLAN-based WAN connections.

ER7212PC(UN)_V2.6_2.5.2_Build 20260924

Omada Incident Detection and Health Assessment White Paper

How to Configure Internet Settings on Omada Controller Using Omada App

Learn how to configure IPv4 and IPv6 Internet settings on Omada gateways using the Omada App, including WAN connection types and setup steps.

How to Configure DMZ on Omada Gateways

Learn how to configure DMZ on Omada Gateways in Standalone and Controller Mode to forward inbound WAN traffic to a designated internal host.

Omada Hardware Controller Management Capacity: Recommended and Maximum Device Limits

Understand recommended and maximum device capacities for Omada Controllers, capacity notifications, and performance considerations when managing large-scale deployments.

ER7212PC(UN)_V2.6_2.4.3 Build 20260722

How to Prepare for the End of ECSP v1 Support in Omada Controller

Learn how to identify ECSP v1 devices, upgrade to ECSP v2-compatible firmware, and prepare Local or Cloud-Based Controllers for v6.4 and later.

How to Allow Specific Public IPs to Access an Internal Server on Omada Gateways

When hosting an internal server behind an Omada Gateway, such as a web server, exposing it to the Internet can pose security risks. This guide demonstrates how to allow only specific public IP addresses to access an internal server, while blocking all other public traffic.

How to Utilize Link Backup and Policy Routing to Keep Critical Devices Online and Conserve Data

In dual-WAN environments where one WAN connection is designated as a backup link, it is often necessary to control which devices and networks are permitted to use the backup connection during a failover event. This guide demonstrates how to use Policy Routing to allow only specific devices, networks, or IP addresses to route traffic through the backup WAN.