Documents

How to use Bridge AP Alignment via Omada APP

Since the antennas of the EAP Bridge model are directional and operate in pairs, they need to be networked through a mesh; moreover, in the installation scenarios, the two Bridges may be quite far apart. If they are not correctly aligned, it may result in poor connection signals, and it is also difficult for users to align them visually. Therefore, we provide an alignment function to guide users in aligning the two Bridges using RSSI, thereby establishing a better connection.

How to use Bridge AP speed test on Omada Controller via Omada APP

Speed tests are widely used to check home broadband, corporate networks, or mobile data connections. They help users verify whether their network provider delivers the promised bandwidth and diagnose connectivity issues. We have added speed test feature for our bridge AP products via Omada APP. You will learn how to use this feature in this guide.

How to assign a static IP address to the EAP using Omada APP

Learn how to configure a static IP address for your EAP (Omada Access Point) using the Omada APP.

How to unbind an Omada device from a TP-Link account using Omada App

TP-Link ID provides a unified authentication service, allowing you to use a single email address to log in to TP-Link Community, Omada Cloud, the Training system, and manage TP-Link products with TP-Link Apps such as Aginet, Omada, VIGI, Deco, Tether, Kasa, and Tapo. You can unbind the TP-Link account from devices by removing them via the Omada app. After unbinding, you can re-register the Omada devices to another account (TP-Link ID).

How to configure Account in Controller mode using Omada App

You may want to configure the account in Controller when you use the Omada App, in this article you will know how to do this step by step.

How to Set Up PPTP & L2TP VPN Server with Omada Gateway Using Omada APP

PPTP is the simplest and most basic type of VPN. L2TP is a more secure VPN protocol built on top of PPTP. Omada Gateway supports acting as a server for both VPN types and offers multiple configuration methods. This document introduces how to configure PPTP and L2TP VPN servers via the Omada App in Controller Mode.

How to set up Site-to-Site Auto IPsec VPN Tunnels on Omada Gateway via Omada Controller using Omada APP

How to unbind the TP-Link ID in the Omada Guard App

How to Use DORI Standards to Determine the Best Viewing Range for Omada Camera Focal Lengths

How to Choose and Verify MicroSD Cards for Omada Cameras

How to choose a suitable HDD for Omada NVR

Support and Feature Differences for Omada, VIGI, and Third-Party Cameras in Omada Central

Customers can use Omada Central to manage cameras of different brands and use the corresponding functions.

Recommended Server Specifications for Omada Pro Software Controller

This article introduces the recommended hardware specifications of the server for the Omada Pro Software Controller.

Why did I receive an email titled "Potential Vulnerabilities Detected in Your Account"?

How do I know the type of my Omada switch?

What performance you can expect in a Mesh network

This article introduces what a Mesh network is, how the performance you can expect in a Mesh Network is, if it does not reach your expectations, and how to optimize it.

Should I keep the Omada Controller running after configuration?

This article explains whether you need to keep an Omada Controller running to use different functions of APs. Objective

Introduction to Omada

This article will help you get started with Omada SDN networking solution.

How to add Omada Controller via Omada App

This article would tell you the correct and simple steps to add your Omada Controller via Omada App.

The differences and similarities between Load Balancing and Link Backup

WAN load balancing and WAN link backup can distribute network data traffic and switch data links according to the online/offline status of WAN ports in multi-WAN scenarios, providing a solid foundation for building efficient and reliable network systems.