文件

Brief introduction about VLAN topology in Omada Network v6

This FAQ introduces some tips and highlights about VLAN topology in Omada Network v6.

How to provide project quotations on Omada Design Hub

This article provides guidance for how to provide professional and flexible project quotation on Omada Design Hub.

What’s new in Omada Network V6 Topology Display

What changes are there in Omada Controller v6 compared to v5?

The objective of this document is to provide with a comprehensive, section-by-section mapping between Omada Controller version 5.x and the re-architected 6.0 user interface.

How to Configure Portal Authentication on Omada Controller using Omada App

This guide provides instructions for configuring portal authentication on Omada Controller using Omada App.

How to Preconfigure WAN Settings on Omada Controller using Omada APP

This guide provides instructions for preconfiguring WAN settings on Omada Controller using Omada APP.

如何透過 Omada APP使用網橋校準功能

Since the antennas of the EAP Bridge model are directional and operate in pairs, they need to be networked through a mesh; moreover, in the installation scenarios, the two Bridges may be quite far apart. If they are not correctly aligned, it may result in poor connection signals, and it is also difficult for users to align them visually. Therefore, we provide an alignment function to guide users in aligning the two Bridges using RSSI, thereby establishing a better connection.

How to use Bridge AP speed test on Omada Controller via Omada APP

Speed tests are widely used to check home broadband, corporate networks, or mobile data connections. They help users verify whether their network provider delivers the promised bandwidth and diagnose connectivity issues. We have added speed test feature for our bridge AP products via Omada APP. You will learn how to use this feature in this guide.

How to assign a static IP address to the EAP using Omada APP

Learn how to configure a static IP address for your EAP (Omada Access Point) using the Omada APP.

How to unbind an Omada device from a TP-Link account using Omada App

TP-Link ID provides a unified authentication service, allowing you to use a single email address to log in to TP-Link Community, Omada Cloud, the Training system, and manage TP-Link products with TP-Link Apps such as Aginet, Omada, VIGI, Deco, Tether, Kasa, and Tapo. You can unbind the TP-Link account from devices by removing them via the Omada app. After unbinding, you can re-register the Omada devices to another account (TP-Link ID).

How to configure Account in Controller mode using Omada App

You may want to configure the account in Controller when you use the Omada App, in this article you will know how to do this step by step.

How to Set Up PPTP & L2TP VPN Server with Omada Gateway Using Omada APP

PPTP is the simplest and most basic type of VPN. L2TP is a more secure VPN protocol built on top of PPTP. Omada Gateway supports acting as a server for both VPN types and offers multiple configuration methods. This document introduces how to configure PPTP and L2TP VPN servers via the Omada App in Controller Mode.

How to set up Site-to-Site Auto IPsec VPN Tunnels on Omada Gateway via Omada Controller using Omada APP

How to unbind the TP-Link ID in the Omada Guard App

How to Use DORI Standards to Determine the Best Viewing Range for Omada Camera Focal Lengths

How to Choose and Verify MicroSD Cards for Omada Cameras

How to choose a suitable HDD for Omada NVR

Omada Central 對 Omada、VIGI 和第三方攝影機的支援和功能差異

客戶可以使用Omada Central管理不同品牌的攝影機並使用對應的功能。

Omada Pro 軟體控制器建議伺服器規格

此篇文章說明Omada Pro軟體控制器伺服器推薦使用的硬體規格

為什麼我會收到標題為「您的帳號中偵測到潛在漏洞」的電子郵件？