Tài liệu

How to Utilize Link Backup and Policy Routing to Keep Critical Devices Online and Conserve Data

In dual-WAN environments where one WAN connection is designated as a backup link, it is often necessary to control which devices and networks are permitted to use the backup connection during a failover event. This guide demonstrates how to use Policy Routing to allow only specific devices, networks, or IP addresses to route traffic through the backup WAN.

WLAN Optimization (AI-RRM) White Paper

How to Configure PIMv6 and MLD on Omada Campus Switches

Omada Campus switches support IPv6 PIM-DM and PIM-SM. Where IPv6 PIM-DM suits the network with smaller size and concentrated group members. IPv6 PIM-SM suits the network with larger size and dispersed group members.

How to configure MP-BGP on Omada Campus Switches

Currently, MP‑BGP on Omada Campus Switches supports the IPv6 unicast address family. This article demonstrates the configuration of MP-BGP on Omada Campus switches in standalone mode.

EAP610-Outdoor(EU)_V1.30_1.6.7 Build 20260507

EAP610-Outdoor(EU)_V1.20_1.6.7 Build 20260507

EAP610-Outdoor(EU)_V1_1.6.7 Build 20260507

How to configure Port Mirror on Omada Gateways?

This article describes how to configure port mirroring for Gateways on Omada Controller and Standalone Mode. Port Mirroring is a feature that copies network traffic from one or more ports and sends it to another port for monitoring or analysis. This is commonly used for troubleshooting network issues, monitoring traffic, or performing traffic analysis using packet capture tools.

How to Use an Omada Controller to Manage Omada Devices Across Different Subnets Over the Internet

In enterprise networks, devices are often deployed across different subnets, making it common for Omada devices and the Omada Controller to reside in separate network segments. Supporting device adoption and management across subnets enables centralized control without changing existing network designs. This article introduces different methods for adopting devices across subnets using Omada products.

How to configure L2VPN VPWS/VPLS on Omada Campus Switches

This FAQ introduces the VPWS/VPLS feature and explains how to configure it using the switch CLI.

ES228GMP(UN)_V1.26_Datasheet

ES224G(UN)_V1.26_Datasheet

ES220GMP(UN)_V1.26_Datasheet

ES216G(UN)_V1.26_Datasheet

ES210GMP(UN)_V1.26_Datasheet

ES208G(UN)_V1.26_Datasheet

ES206GP(UN)_V1.26_Datasheet

ES205GP(UN)_V1.26_Datasheet

ES205G(UN)_V1.26_Datasheet

ES228GP(UN)_V1.6_Datasheet