Tài liệu

Omada OUI-Based VLAN Configuration Guide

OUI-Based VLAN allows Omada switches to automatically recognize IP Phones based on the OUI portion of their MAC address and place them into the appropriate Voice VLAN. This is especially useful in environments where IP Phones do not support automatic voice VLAN advertisement methods such as LLDP-MED.

How to Use iPerf to Test the Speed on macOS

When testing the speed of devices, iPerf can be used to measure the pure, maximum throughput of a local network without involving an ISP or external traffic. In this guide, we’ll walk through how to use iPerf to test the speed on macOS.

How to configure Gateway ACL on Fusion Gateway

ACL (Access Control List) allows a network administrator to create rules to restrict access to network resources. ACL rules filter traffic based on specified criteria such as IP Subnet, Network, Device, specific Application and special Port, and determine whether to forward the matched packets. These rules can be applied to specific clients or groups whose traffic passes through the gateway.

How to Configure SD-WAN on Fusion Gateway

Software-Defined Wide Area Network (SD-WAN) revolutionizes traditional WAN architectures by leveraging centralized control and automation to dynamically route traffic across multiple connections (e.g., MPLS, broadband, LTE). The key benefit of SD-WAN is centralized Policy Management, allowing users to define and manage network policy across different Fusion Gateway systems.

Getting started with an Omada Fusion Gateway

This article will guide you through getting started with your Omada Fusion Gateway.

How to Use Gateway QoS Function with an Omada Fusion Gateway

Gateway QoS (Quality of Service) refers to a set of mechanisms implemented on a network gateway (such as a router or firewall) to manage, prioritize, and control traffic flows across the network. Its primary objective is to ensure predictable performance for critical applications while optimizing overall bandwidth utilization.

Troubleshooting Guide for Common Issues with Fusion Gateway

This article provides a basic troubleshooting guide for common issues encountered when using an Omada Fusion Gateway. If you encounter any related issues, you can refer to this article first to troubleshoot them.

How to Configure Gateway Rules for Content Filtering on Fusion Gateway

Omada Fusion Gateway content filtering supports multiple filtering methods, including category-based filtering, domain allow/block lists, and Ad blocker. The built-in Ad Blocker uses DNS-level domain filtering to block advertising and tracking domains, helping reduce intrusive ads and enhance the overall browsing experience. Filtering rules can be applied to specific networks, IP groups, or individual client devices.

How to set up Omada Fusion Gateway using Omada App

Getting Started with LightLink VPN

LightLink VPN is designed for zero-configuration remote access, allowing users to securely access your network from anywhere. LightLink VPN uses an invite-based setup. The administrator generates an invite (link or email), and the invited user opens it in the Navi App and taps “Connect” to start the VPN. This article will introduce how to use this function.

How to Utilize Link Backup and Policy Routing to Keep Critical Devices Online and Conserve Data

In dual-WAN environments where one WAN connection is designated as a backup link, it is often necessary to control which devices and networks are permitted to use the backup connection during a failover event. This guide demonstrates how to use Policy Routing to allow only specific devices, networks, or IP addresses to route traffic through the backup WAN.

WLAN Optimization (AI-RRM) White Paper

How to Configure PIMv6 and MLD on Omada Campus Switches

Omada Campus switches support IPv6 PIM-DM and PIM-SM. Where IPv6 PIM-DM suits the network with smaller size and concentrated group members. IPv6 PIM-SM suits the network with larger size and dispersed group members.

How to configure MP-BGP on Omada Campus Switches

Currently, MP‑BGP on Omada Campus Switches supports the IPv6 unicast address family. This article demonstrates the configuration of MP-BGP on Omada Campus switches in standalone mode.

How to configure Port Mirror on Omada Gateways?

This article describes how to configure port mirroring for Gateways on Omada Controller and Standalone Mode. Port Mirroring is a feature that copies network traffic from one or more ports and sends it to another port for monitoring or analysis. This is commonly used for troubleshooting network issues, monitoring traffic, or performing traffic analysis using packet capture tools.

How to Use an Omada Controller to Manage Omada Devices Across Different Subnets Over the Internet

In enterprise networks, devices are often deployed across different subnets, making it common for Omada devices and the Omada Controller to reside in separate network segments. Supporting device adoption and management across subnets enables centralized control without changing existing network designs. This article introduces different methods for adopting devices across subnets using Omada products.

How to configure L2VPN VPWS/VPLS on Omada Campus Switches

This FAQ introduces the VPWS/VPLS feature and explains how to configure it using the switch CLI.

Khắc phục sự cố không thể khởi động Omada Controller trên Windows (phiên bản v6 trở lên)

Đôi khi chúng ta có thể gặp phải sự cố trang khởi động (Start Page) của Controller không tự động hiển thị khi nhấp đúp vào biểu tượng khởi động, khiến Omada Controller không thể được khởi động thành công.

Hướng dẫn cấu hình Spanning Tree trên Omada Controller

Spanning Tree Protocol (STP) là một giao thức lớp 2 (Layer 2) được sử dụng để ngăn chặn hiện tượng vòng lặp (Loop) trong mạng.

Khắc phục sự cố Omada Controller V6 không thể adopt thiết bị

FAQ này chủ yếu giới thiệu các nguyên nhân phổ biến gây ra lỗi khi adopt thiết bị Omada (bao gồm EAP, Gateway và Switch) bằng Omada Controller, cùng với các phương pháp khắc phục và giải pháp tương ứng.