Switch Gerenciável L3 PoE+ Omada Pro com 24 Portas Gigabit, 4 Slots 10G e Suporte a Empilhamento

S6500-24GP4XF(UN)_V1_1.0.3 Build 20250124

VRRP troubleshooting guide

This guide describes the troubleshooting methods to find out the causes of network failures induced by VRRP.

Troubleshooting guide for IP Multicast-routing on Omada Pro Switch

By demonstrating troubleshooting in typical topologies for PIM-DM and PIM-SM modes, this article introduces the basic L3 multicast troubleshooting process and technology.

Troubleshooting Guide: Failing to detect OAM link fault

Ethernet Operations, Administration, and Maintenance (OAM) is a Layer 2 protocol defined in the IEEE 802.3ah standard used to monitor and troubleshoot Ethernet network problems. With Ethernet OAM, network administrators can manage the network effectively. Currently, Omada L2+/L3 switches support Ethernet Flow Monitoring OAM (EFM OAM).

Troubleshooting guide for BGP Neighbors establishment issues

The Border Gateway Protocol (BGP) is a distance vector routing protocol that enables routing reachability between Autonomous Systems (AS) and selects the best route.

Troubleshooting guide of OSPF

This guide introduces common troubleshooting processes and techniques that can be used to identify the causes of network failures caused by the OSPF module.

S6500-24GP4XF(UN)_V1_Datasheet

What should I do if my switch has no Internet access?

This article will list a few simple steps about how to do a check on the switch when the switch has no Internet access and try to solve the problem.

What should I do if my Internet from switch is unstable?

This article will list a few simple steps about how to do a check on the switch when the Internet is unstable and try to solve the problem.

How to configure RIP on Omada L3 Switches via Omada Controller

RIP (Routing Information Protocol) is an Interior Gateway Protocol (IGP) based on the Distance-Vector algorithm. It’s mainly used in smaller networks, such as campus networks or simpler regional networks.