(TL-)SX3008F(UN)_V1_1.20.0 Build 20231011

Notă de lansare

01-08-2024

12441

Acest ghid este valabil pentru

This firmware is fully adapted to Omada SDN Controller v5.9 and above.

The TL-SX3008F(UN)1.0/1.6 can be upgraded using this firmware, and the upgrade will result in the following changes:
1. Remove "TL-" from the Device Name.
2. Hardware version will change from V1.0/V1.6 to V1.20/V1.26.
3. JetStream in the System Description will be changed to Omada.

Bug Fix:
1. Fix the bug that the client could not get an IP address after binding ACLs on the port.
2. Fix the bug of slow RSTP convergence after device reboot.

Te rugăm să evalueazi acest document