(TL-)SX3008F(UN)_V1_1.20.0 Build 20231011

Thông báo phát hành

01-08-2024

10869

This Article Applies to

This firmware is fully adapted to Omada SDN Controller v5.9 and above.

The TL-SX3008F(UN)1.0/1.6 can be upgraded using this firmware, and the upgrade will result in the following changes:
1. Remove "TL-" from the Device Name.
2. Hardware version will change from V1.0/V1.6 to V1.20/V1.26.
3. JetStream in the System Description will be changed to Omada.

Bug Fix:
1. Fix the bug that the client could not get an IP address after binding ACLs on the port.
2. Fix the bug of slow RSTP convergence after device reboot.

Please Rate this Document