BE19000 Трехдиапазонная потолочная точка доступа Wi-Fi 7

Getting Started with AFC

This article provides comprehensive information about AFC (Automated Frequency Coordination) for Wi-Fi products. It covers key aspects, including its working principle, regulatory compliance, compatibility with Omada AP products, configuration steps, etc., and aims to assist users in understanding and effectively utilizing AFC to enhance their Wi-Fi network experience.

Getting started with the standalone EAP

This article introduces how to quickly set up the Omada EAP in Standalone mode.

EAP783_V1_Datasheet

What performance you can expect in a Mesh network

This article introduces what a Mesh network is, how the performance you can expect in a Mesh Network is, if it does not reach your expectations, and how to optimize it.

Instructions for SSID security settings on Omada Controller

Omada Controller supports five encryption methods for wireless security: None, WPA-Personal, WPA-Enterprise, PPSK without RADIUS, and PPSK with RADIUS. Users can choose different encryption methods according to their actual needs.

How to configure MAC-Based Authentication on Omada Controller

MAC-Based Authentication allows specific clients to access a wireless network based on their MAC addresses while denying access to the rest.

How to configure Fast Roaming on Omada Controller

This article describes how to configure the Fast Roaming function on the Omada Controller to optimize client roaming performance of Omada APs.

How to configure SSID VLAN on Omada AP with Third-Party Gateway

This article introduces how to configure SSID VLAN on the Omada APs to realize VLAN isolation.

How to Configure 802.11 Rate Control on Omada Controller

If your network includes a significant number of legacy wireless clients using 802.11a/b/g standards, and most clients are experiencing degraded performance (such as slow webpage loading, video buffering, or high latency), you can enhance network efficiency by adequately configuring the 802.11 Rate Control feature in the Omada Controller.

Should I keep the Omada Controller running after configuration?

This article explains whether you need to keep an Omada Controller running to use different functions of APs. Objective