Omada 4G+ Cat6 AX3000 Wi-Fi 6 Gigabit VPN Gateway

ER706W-4G(EU)_V2.20_2.2.1 Build 20260915

ER706W-4G(EU)_V2.20_Datasheet

How to Configure DMZ on Omada Gateways

Learn how to configure DMZ on Omada Gateways in Standalone and Controller Mode to forward inbound WAN traffic to a designated internal host.

How to Configure Quality of Service (QoS) on an Omada Gateway in Standalone Mode

Configure Omada Gateway QoS in Standalone Mode to classify traffic, allocate WAN bandwidth, prioritize VoIP, and apply outbound DSCP markings.

ER706W-4G(EU)_V2.20_2.1.11 Build 20260723

How to Set Up an SSL VPN Server on Omada Gateway in Controller Mode

Learn how to set up an SSL VPN server on an Omada Gateway in Controller Mode, configure user authentication and client access permissions, and securely enable remote access to your private network.

How to Choose a SIM Card Plan and Configure LTE WAN on Your Omada Gateway

Using a SIM card as the WAN connection on an Omada gateway provides a flexible and reliable networking solution, especially in scenarios where traditional wired connections are unavailable or unstable. It is widely used in applications such as remote sites, temporary deployments, backup WAN failover, and mobile or outdoor environments.

How to Configure Dynamic DNS (DDNS) on Omada and Fusion Gateways Using the Omada App

Need to configure DDNS on an Omada or Fusion Gateway? Follow these steps to maintain a consistent hostname when your public IP address changes.

How to Allow Specific Public IPs to Access an Internal Server on Omada Gateways

When hosting an internal server behind an Omada Gateway, such as a web server, exposing it to the Internet can pose security risks. This guide demonstrates how to allow only specific public IP addresses to access an internal server, while blocking all other public traffic.

How to Utilize Link Backup and Policy Routing to Keep Critical Devices Online and Conserve Data

In dual-WAN environments where one WAN connection is designated as a backup link, it is often necessary to control which devices and networks are permitted to use the backup connection during a failover event. This guide demonstrates how to use Policy Routing to allow only specific devices, networks, or IP addresses to route traffic through the backup WAN.